K R A ME R E LE CT R O N IC S L TD .
Contents 1 Introduction 1 2 2.1 2.2 2.3 3 3.1 3.2 Getting Started Achieving the Best Performance Safety Instructions Recycling Kramer Products Overview 650T DVI-Coax Transmitter 650R Coax-DVI Receiver 2 2 3 3 4 4 5 4 4.1 4.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis.
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual i 2.1 Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
2.2 Safety Instructions ! 2.3 Caution: There are no operator serviceable parts inside the unit Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled.
3 Overview This section describes the: 3.1 650T DVI-Coax Transmitter, see Section 3.1 650R Coax-DVI Receiver, see Section 3.2 650T DVI-Coax Transmitter The Kramer DigiTOOLS® 650T is an DVI-coax transmitter that receives an DVI signal, codes it, and transmits red, green, blue, clock and data signals, as well as power, infrared and RS-232 control signals over coax cable to the 650R receiver.
3.2 650R Coax-DVI Receiver The Kramer DigiTOOLS® 650R is a coax-DVI receiver that receives a coded coax signal transmitted by the 650T. It decodes the R-G-B, clock and data components and converts them to an DVI output. The 650R features: A maximum data rate of 6.75Gbps (2.
4 Your 650T/650R DVI/Coax Transmitter/Receiver This section defines the 650T DVI-Coax Transmitter (see Section 4.1) and the 650R Coax-DVI Receiver (see Section 4.2) 4.
4.
5 Connecting the 650T/650R You can use the 650T DVI-Coax Transmitter and the 650R Coax-DVI Receiver to configure an DVI-to-Coax Transmitter and Receiver system (see Figure 3). i Always switch off the power to each device before connecting it to your 650T/650R. After connecting your 650T/650R, connect its power and then switch on the power to each device. To connect the DVI-to-Coax Transmitter and Receiver system as shown in the example in Figure 3, do the following: 1.
Figure 3: DVI-to-Coax Transmitter and Receiver System 650T/650R - Connecting the 650T/650R 9
6 Technical Specifications INPUTS: 1 DVI connector 5 BNC connectors OUTPUTS: 5 BNC connectors 1 DVI connector PORT: IR on a 3.5mm mini jack, RS-232 on a 9-pin D-sub connector MAX. DATA RATE: Supports up to 6.75Gbps (2.
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.