Kramer Electronics, Ltd.
Contents Contents 1 2 3 4 5 5.1 5.
Introduction 1 Introduction Dedication by Kramer Electronics since 1981, to the development and manufacture of high quality video/audio equipment, makes the Kramer line an integral part of the finest production and presentation facilities in the world.
Overview 1 Receiver constitutes a video line transmitter / receiver system.
Video Line Transmitter and Output Video Line Receiver 4 Video Line Transmitter and Output Video Line Receiver Figure 1, Table 1 and Table 2 define the 703xl Quad Video Line Transmitter: Figure 1: 703xl Quad Video Line Transmitter Table 1: Front Panel 703xl Quad Video Line Transmitter Features Feature POWER Switch GAIN Trimmer EQ. Trimmer GAIN Trimmer EQ. Trimmer GAIN Trimmer EQ. Trimmer GAIN Trimmer EQ.
Video Line Transmitter and Output Video Line Receiver Figure 2 and Table 3 define the 705xl Dual Video Line Transmitter: Figure 2: 705xl Dual Video Line Transmitter Table 3: 705xl Dual Video Line Transmitter Features # 1 2 3 4 Feature 12 VDC OUTPUTS Terminal Block Connectors (1 to 2) CV IN BNC Connectors TERM Button 5 6 7 8 9 10 LOOP BNC Connectors ON LED EQ. 2 Trimmer GAIN 2 Trimmer EQ.
Connecting a Video Line Transmitter/ Receiver System Figure 3: 706xl Dual Output Video Line Receiver Table 4: 706xl Dual Output Video Line Receiver Features 5 # 1 2 Feature 12 VDC IN Terminal Block Connector 3 4 5 6 7 8 9 LOOP Terminal Block Connector TERM Button OUT 2 BNC Connector OUT 1 BNC Connector ON LED GAIN Trimmer EQ.
Connecting a Video Line Transmitter/ Receiver System 5.1 Connecting a Dual Video Line Transmitter/ Receiver System To configure a Dual Video Line Transmitter / Dual Output Video Line Receiver system, using two 705xl units and four 706xl units, as Figure 4 illustrates, do the following: 1. Connect a composite video source (for example, a VCR) to the CV IN BNC connector on the first 705xl unit and release the TERM button to Hi-Z. 2.
Connecting a Video Line Transmitter/ Receiver System Figure 4: 705xl Dual Video Line Transmitter / Receiver System 7
Connecting a Video Line Transmitter/ Receiver System 5.2 Connecting a Quad Video Line Transmitter/ Receiver System To configure a Quad Video Line Transmitter / Dual Output Video Line Receiver system, using a 703xl unit and up to four 706xl units, as Figure 5 illustrates, do the following: 1. Connect up to 4 composite video sources (for example, 4 VCRs) to the 4 IN BNC connectors on the 703xl unit. 2.
Connecting a Video Line Transmitter/ Receiver System Figure 5: 703xl Quad Video Line Transmitter / Receiver System 9
Technical Specifications 6 Technical Specifications Table 5 defines the technical specifications1 of the 703xl / 705xl / 706xl (using 100m UTP cable, unless stated otherwise): Table 5: Technical Specifications of the 703xl / 705xl / 706xl INPUTS: 703xl: 4 composite video 1Vpp/75 on BNC connectors; 4 Loop 1Vpp/75 on BNC connectors 705xl: 1 composite video 1Vpp/75 on a BNC connector; 1 Loop 1Vpp/75 on a BNC connector 706xl: 1 input on terminal block connectors; 1 Loop on terminal block connectors OUTPUTS
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for three years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com. Updates to this user manual may be found at http://www.kramerelectronics.com/manuals.html. We welcome your questions, comments and feedback. Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
