User Manual

Video Line Transmitter and Output Video Line Receiver
3
4 Video Line Transmitter and Output Video Line Receiver
Figure 1, Table 1 and Table 2 define the 703xl Quad Video Line Transmitter:
Figure 1: 703xl Quad Video Line Transmitter
Table 1: Front Panel 703xl Quad Video Line Transmitter Features
# Feature Function
1 POWER Switch Illuminated switch supplying power to the unit
2 GAIN Trimmer Adjusts
1
the output signal level for output 4
3
CH 4
EQ. Trimmer Adjusts
1
the cable compensation equalization level for output 4
4 GAIN Trimmer Adjusts
1
the output signal level for output 3
5
CH 3
EQ. Trimmer Adjusts
1
the cable compensation equalization level for output 3
6 GAIN Trimmer Adjusts
1
the output signal level for output 2
7
CH 2
EQ. Trimmer Adjusts
1
the cable compensation equalization level for output 2
8 GAIN Trimmer Adjusts
1
the output signal level for output 1
9
CH 1
EQ. Trimmer Adjusts
1
the cable compensation equalization level for output 1
Table 2: Rear Panel 703xl Quad Video Line Transmitter Features
# Feature Function
1 LOOP BNC Connectors (1 to 4) For looping (if required) the input sources
2 IN BNC Connectors (1 to 4) Connects to the composite video sources
3 TERM=IN Buttons (1 to 4)
Pushing in selects 75; releasing selects Hi-Z
2
4 OUTPUTS Terminal Block
Connectors (1 to 4)
Connect an output to an IN connector on a 706xl
Dual Output Video Line Receiver
3
5 12 VDC +12V DC connector for powering the unit
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
2 For looping select Hi-Z
3 See Figure 5