User manual

10 905xl - Operating the 905xl Power Amplifier
Figure 3: Audio Control Window
To use the Audio Control Program:
1. Download and install the program on your PC from
http://www.kramerelectronics.com.
2. Connect the 905xl to the correct COM port of the PC (see
Section 6
3. Open the Audio Control program.
The Audio Control window appears (see
).
Figure 3).
4. Select Input 1 or 2.
5. Make volume, equalization and balance adjustments by dragging the sliders
in the window.
6. Turn loudness on and off by checking or unchecking the Loudness
checkbox.