Instruction Manual

Introduction
1
1 Introduction
This document describes the functionality of the K-UPLOAD application which can upload a
multi-file package (*.kpt or a single file, such as *.kfw (firmware), *.rbf (FPGA binary) and so
on, depending on the specific device) to a device.
Kramer’s high quality machines usually require the uploading of several files, such as firmware
version, FPGA version (sometimes more than one), different binary files, and so on.
Uploading each of these files separately may cause version mismatches which can lead to
irregular machine behavior. To solve this problem, all new utility uploads are prepared in one
upload package (*kpt) that includes all the data needed to upgrade the machine to a new version.
2 Using K-UPLOAD
Upgrade should be carried out by skilled technical personnel. Failure to upgrade correctly will
result in the malfunction of the machine
To use K-UPLOAD:
• Download the software from the Internet
• Connect the PC to the machine
2.1 Downloading from the Internet
The latest version of K-UPLOAD and installation instructions can be downloaded from the
Kramer Web site at www.kramerelectronics.com
You can download the up-to-date file from the Internet. To do so:
1. Go to our Web site at www.kramerelectronics.com and download the file: “kUpload.msi”
from the Technical Support section.
2. Install the Program.
2.2 Connecting the PC to the Machine
To use K-UPLOAD you have to connect the PC to the machine via RS-232, USB or the Ethernet
(defined in the user manual of the machine).