Owner manual

KRAMER ELECTRONICS LTD. PN: 2900-004001

Table of Contents

INTRODUCTION 1

1.1 A Word on Format Interfaces 1

1.2 Factors Affecting Quality of Results 2

2 SPECIFICATIONS 3

3 HOW DO I GET STARTED? 5

4 UNPACKING AND CONTENTS 5

4.1 Optional Accessories 5

5 FORMAT INTERFACES 6

5.1 Getting to Know Your FC-10 6

5.2 Getting to Know Your FC-19 7

5.3 Getting to Know Your FC-4041C 8

5.4 Getting to Know Your FC-4042 9

5.5 Getting to Know Your FC-4043 10

5.6 Getting to Know Your FC-4044 11

5.7 Getting to Know Your FC-4208 12

6 INSTALLATION 13

6.1 Rack Mounting 13

7 CONNECTING TO VIDEO DEVICES 13

8 CONNECTING TO AUDIO DEVICES (FC-4208 ONLY) 13

9 USING THE MACHINES 13

9.1 Powering on the Machine 13

9.2 Composite/YC Video Selection (FC-19, FC-4043, FC-4044 only) 13

9.3 Adjusting the HUE (FC-4043, FC-4044 only) 13

9.4 Looping (FC-4041C only) 13

9.5 Audio Level Control (FC-4208 only) 14

10 TYPICAL APPLICATIONS 14

10.1 Interfacing Between Two Video Formats 14

10.2 Using PC Graphics in YC Production 15

10.3 Typical Composite/YC to Component/RGB Conversion 15

10.4 Integrating a Composite/RGB source Into a Composite/YC Switcher 16

10.5 Audio Format Conversion 17

11 TAKING CARE OF YOUR MACHINE 18

12 TROUBLESHOOTING 19

12.1 Power and Indicators 19

12.2 Video Signal 20

Video Signal (continued) 21

12.3 Audio Signal (FC-4208 only) 21