User guide

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your FC-10Dxl Composite-YC-Component Transcoder
4
4 Your FC-10Dxl Composite-YC-Component Transcoder
Figure 1 and Table 1 define the FC-10Dxl.
Figure 1: FC-10Dxl Composite-YC-Component Transcoder
Table 1: FC-10Dxl Composite-YC-Component Transcoder Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 SELECT Button Press to select the input format (CV or Y/C)
CV LED Lights when the CV input is selected
INPUT
Area
Y/C LED Lights when the Y/C input is selected
3 SELECT Button Press to select the desired output format
COMP. (Y/B-Y/R-Y) LED Lights when the component video output format is selected
RGB LED Lights when the RsGsBs output format is selected
OUTPUT
Area
CV+Y/C LED Lights when the CV as well as the Y/C output format is
selected
4 CV RCA Connector Connect to the CV source INPUT
Y/C 4-pin Connector Connect to the s-Video source
5 Y/G RCA Connector
B-Y/B/CV RCA Connector
R-Y/R/C RCA Connector
Connect to the CV (via B-Y/B/CV) and/or to the s-Video
1
(Y/G and R-Y/R/C) acceptor, or to the component acceptor
OUTPUT
Y/C 4-pin Connector Connect to the s-Video
1
acceptor
6 REMOTE INPUT SELECT Terminal
Block Connector
Connect to contact closure switches (see section 5.1)
7 12V DC +12V DC connector for powering the unit
1 If the s-Video acceptor is connected to the Y/C 4-pin connector, you cannot connect to the Y/G and R-Y/R/C RCA
connectors and vice versa