Manual

FC-10ETH – Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 Defining the FC-10ETH Ethernet Controller 5
4 Configuring the FC-10ETH Ethernet Controller 7
4.1 Operating via Ethernet 7
4.2 Installing and Configuring the FC-10ETH 11
4.3 Defining the Kramer FC-10ETH Manager 12
4.4 Routing Data 13
5 Controlling Machines via the Ethernet using the FC-10ETH 15
5.1 Controlling a Machine via a Computer 15
5.2 Controlling a Kramer Machine via a Serial Controller 17
6 Flash Memory Upgrade 20
6.1 Upgrading Version 1 Devices 20
6.2 Upgrading Version 2 Devices 21
7 Technical Specifications 22
Figures
Figure 1: FC-10ETH Ethernet Controller 5
Figure 2: Underside of the FC-10ETH Ethernet Controller 5
Figure 3: Local Area Connection Properties Window 8
Figure 4: Internet Protocol Version 4 Properties Window 9
Figure 5: Internet Protocol Version 6 Properties Window 9
Figure 6: Internet Protocol Properties Window 10
Figure 7: Connecting the FC-10ETH for Configuration 11
Figure 8: FC-10ETH Manager Window 12
Figure 9: Connecting the FC-10ETH in the Passive Routing Mode 16
Figure 10: The Port Window – Selecting a Remote Connection 17
Figure 11: Connecting the FC-10ETH in the Active Routing Mode 19
Figure 12: The KFR-Programmer Window 21