Kramer Electronics, Ltd.
Contents Contents 1 2 2.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps.
Overview 3 Overview The FC-32 DVI to PC/Component Converter is a high-performance format converter for digital DVI-D signals. It converts a DVI-D input to a computer graphics or component video output on a 15-pin HD connection.
Your FC-32 DVI to PC/Component Converter 4 Your FC-32 DVI to PC/Component Converter Figure 1 and Table 1 define the unit.
Connecting the FC-32 DVI to PC/Component Converter 5 Connecting the FC-32 DVI to PC/Component Converter To connect the FC-32, as the example in Figure 2 illustrates, do the following1: 1. Connect the digital input source (such as, a computer graphics source) to the 24-pin Molex INPUT connector. 2. Connect an output acceptor (such as, a computer graphics VGA display or component display) to the PC/COMPONENT OUT 15-pin HD connector. 3.
Technical Specifications 7 Technical Specifications The FC-32 technical specifications are shown in Table 2. Table 2: FC-32 Technical Specifications INPUTS: OUTPUTS: RESOLUTION: CONTROL: POWER SOURCE: DIMENSIONS WEIGHT: ACCESSORIES: OPTIONS: 8 1 1 DVI-D, 1.2Vpp on a Molex 24-pin (F) connector; DDC signal 5Vpp (TTL) 1 VGA or YPbPr on a 15-pin HD (F) connector; YPbPr is with bi-level sync 2 Up to WUXGA, 1080p Switch for RGB/YPbPr selection 5V DC, 490mA 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.
EDID Factory Default Data (21) (22) (23) (24) Supported Maximum Horizontal Image Size: 88 cm Maximum Vertical Image Size : 50 cm Display Gamma : 2.20 Power Management and Supported Feature(s): Standby, Suspend, Active Off/Very Low Power, RGB Color, sRGB, Preferred Timing Mode, Default GTF (25-34) Color Characteristics Red Chromaticity : Rx = 0.636 Ry = 0.330 Green Chromaticity : Gx = 0.300 Gy = 0.596 Blue Chromaticity : Bx = 0.150 By = 0.056 Default White Point: Wx = 0.312 Wy = 0.
EDID Factory Default Data Vertical: (90-107) (108-125) Sync Pulse Width: 112 Pixels Border : 0 Pixels Frequency : 47 kHz Active Time : 768 Lines Blanking Time : 27 Lines Sync Offset : 3 Lines Sync Pulse Width: 6 Lines Border : 0 Lines Digital Separate, Horizontal Polarity (+), Vertical Polarity (+) Modeline: "1360x768" 85.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for three years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors visit www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution PN: 2900- 000487 Rev: 3 Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
