Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the FC-331 SD/HD-SDI to HDMI Converter
6
Table 1: FC-331 SD/HD-SDI to HDMI Converter Features
#
Feature
Function
1
SD/HD-SDI IN BNC Connector
Connects to an SD or HD-SDI source
2
SD/HD-SDI LOOP BNC Connector
Connects to an SD or HD-SDI acceptor
3
SDI AUDIO GROUP SELECT
Turn to select the SDI input stereo channel (0 to 7)
4
HDMI OUT Connector
Connects to an HDMI acceptor
5
5V DC
+5V DC connector for powering the unit
6
SD/HD LED
Illuminates green for an SD input signal and blue for an
HD-SDI input signal
7
OUT LED
Illuminates green to indicate that a display is connected
8
ON LED
Illuminates green when receiving power
5 Connecting the FC-331 SD/HD-SDI to HDMI Converter
To connect the FC-331, as the example in Figure 2 illustrates, do the
following
1
:
1. Connect the SD/HD-SDI IN connector to a digital video source (for
example, a digital video player).
2. Connect the SD/HD-SDI LOOP connector to a digital acceptor (for
example, a digital display).
3. Connect the HDMI connector to an HDMI acceptor (for example, a
plasma display).
4. Using a small screwdriver, turn the SDI AUDIO GROUP SELECT rotary
switch to select an SDI stereo channel
2
from 0 to 7.
5. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not illustrated in Figure 2).
1
Switch OFF the power on each device before connecting it to your FC-331. After connecting your FC-331, switch on its
power and then switch on the power on each device
2
SDI audio is made up of 16 channels of audio information or 8 stereo pairs. Whereas most other devices access a group of
2-pairs, the FC-331 accesses a single pair out of a group for higher discrimination