Owner's manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your FC-400 Time Base Corrector/Synchronizer
4
4 Your FC-400 Time Base Corrector/Synchronizer
Figure 1, Table 1, and Table 2 define the FC-400 Time Base
Corrector/Synchronizer.
Figure 1: FC-400 Time Base Corrector/Synchronizer
Table 1: Front Panel FC-400 Time Base Corrector/Synchronizer
#
Feature
Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 GENLOCK Button Press to enable GENLOCK operation
3
INPUT
SELECT
CV Button Selects the composite video source for conversion
4 Y/C Button Selects the s-Video source for conversion
5
SYNC
PHASE
COARSE Trimmer Adjusts
1
the sync phase level
6 FINE Trimmer
7
SCH
COARSE Trimmer Adjusts
1
the horizontal-to-subcarrier phase level
8 FINE Trimmer
9 LOCK Button
2
Disengages the front panel buttons
1 Insert a screwdriver into the small hole and carefully rotate it, trimming the level
2 Press for about 2 seconds to lock/unlock the panel