Manual

Connecting Your FC-4002 Format Converter / TBC
7
6.1 Connecting a PC
To connect a PC to the FC-4002 unit, using the Null-modem adapter
provided with the machine (recommended):
 Connect the RS-232 DB9 rear panel port on the FC-4002 unit to the
Null-modem adapter and connect the Null-modem adapter with a 9 wire flat
cable to the RS-232 DB9 port on your PC
Alternatively, to connect a PC to the FC-4002 unit without using a Null-
modem adapter:
 Connect the RS-232 DB9 port on your PC to the RS-232 DB9 rear panel
port on the FC-4002 unit, as Figure 2 illustrates
Figure 2: Connecting a PC without using a Null-modem Adapter
6.2 Dipswitch Settings
The FC-4002 dipswitch settings are defined in Table 3, Table 4, and Table 5:
Table 3: Output Standard Settings
FUNCTION DIP 1 DIP 2 DIP 3
SECAM with 9H ID OFF OFF OFF
SECAM ON OFF OFF
PAL OFF ON OFF
PAL N ON ON OFF
NTSC 3 OFF OFF ON
NTSC 4 ON OFF ON
PAL M OFF ON ON
Same as the Input Standard ON ON ON
Table 4: Output Format Settings
FUNCTION DIP 6 DIP 7 DIP 8
CV OFF OFF OFF
CV with Pedestal OFF OFF ON
Y/C OFF OFF OFF
Y/C with Pedestal OFF OFF ON
YUV OFF ON OFF
RGB ON ON OFF
RGBS Any Value ON ON