K R A ME R E LE CT R O N IC S L TD .
Contents 1 Introduction 1 2 2.
1 Introduction Kramer Electronics presents the K-touch application that allows you to control your Kramer room control setup from an iOS/Android tablets and smartphones. This on-line guide is intended for the application installer.
2 System Overview and Workflow Once a license has been allocated (K-touch Admin) and the controller configured (K-touch Builder) you can download the application and then sync it to the selected handset. The sync process will download the interface you created online in Ktouch Builder to your iOS or Android handset. Once the sync is complete, you can move on to configuring gateways and attaching devices.
3.
4. Enter your Username and Password (as was allocated for the relevant project on K-touch Admin). 5. Tap the Sync button to download the control screens onto your handset. i At this point, from the relevant K-touch Admin customer account, one license will be deducted from the licenses allocated to this project. 6. The device is now syncing with K-touch Builder. i If an “Out of License Quota” appears this means that there are no available licenses.
i If there are no compatible handsets found, contact your dealer. Once the sync is complete, the controller (as defined in K-touch Builder) appears on the main display: 2.1 Configuring the Gateways This section describes how to connect your touch device to the Kramer room controller. Both should, of course, share the same network. 1. Tap the gateways icon.
2.
3. Enter the IP and port of your relevant Kramer room controller. The username and password are not needed.
