User's Manual
Flash Memory Upgrade
13
1. Type the unit’s IP number
1
Figure 12
in the Address bar of your browser (or type
any link defined by the system integrator).
The RC-8IR front panel is displayed on your screen (see ).
2. Press the on-screen buttons to control the unit.
Figure 12: Internal Web Page Front Panel
7 Flash Memory Upgrade
The RC device firmware is located in FLASH memory, which lets you
upgrade to the latest Kramer firmware version in minutes!
The process involves:
• Downloading the upgrade package from the Internet (see section
7.1)
• Connecting the PC to the RS-232 port (see section
7.2)
• Upgrading the firmware (see section
7.3)
• Installing the Web Applet (see section
7.4)
7.1 Downloading from the Internet
You can download the up-to-date file
2
1. Go to our Web site at http://www.Kramerelectronics.com and download the
file: “SetKFRXXX-xx.zip”
from the technical support section.
from the Internet. To do so:
2. Extract the file “SetKFRXXX-xx.zip”
package, which includes the
KFR-Programmer application setup, the .s19 firmware file and the Web
Applet dat file, to a folder (for example, C:\Program Files\KFR Upgrade).
3. Install the KFR-Programmer Application.
1 The default IP number is 192.168.1.39, and may be changed by the system integrator
2 File names are liable to change from time to time