K R A ME R E LE CT R O N IC S L TD .
Contents 1 Introduction 1 2 2.1 2.2 2.3 3 3.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis.
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual i 2.1 Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
2.2 Safety Instructions ! 2.3 Caution: There are no operator serviceable parts inside the unit Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled.
3 Overview The 102xl 2 Channel Audio Mixer is a high quality, low noise, 2-input mono balanced audio standalone mixer that provides for 2 different levels on each input Mic level or line level as well as the selection of either a dynamic or phantom microphone.
3.1 Defining the 102xl 2-Channel Audio Mixer This section defines the 102xl.
4 Connecting the 102xl i Always switch off the power to each device before connecting it to your 102xl. After connecting your 102xl, connect its power and then switch on the power to each device. To connect up to two balanced audio sources to the 102xl 2 Channel Audio Mixer, as the example in Figure 2 illustrates, do the following: 1. Connect a balanced audio source (for example, a condenser microphone) to the INPUT 1 XLR female connector. Set the INPUT LEVEL SELECT IN 1 switch to MIC.
Figure 2: Connecting the 102xl 2-Channel Audio Mixer 102xl - Connecting the 102xl 7
5 Technical Specifications INPUTS: 2 line/mic balanced mono on XLR (F) connectors OUTPUT: 1 line balanced mono on an XLR (M) connector MAX. OUTPUT LEVEL: 18Vpp @absolute maximum gain BANDWIDTH (-3dB): > 100kHz S/N RATIO: Line: 91.5dB Mic: 62.5dB, 1kHz CONTROLS: Line:<-48dB to +11.4dB, Mic: <-1.9dB to +62.
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.