User's Manual

The Driver Manager

The selected list of commands will appear when setting commands in the port command area:

Figure 157: The Selecting commands in the Port Command Area

9.2 Defining Queries

Queries are used to define the Site-CTRL monitored operation parameters (such as the projector

lamp hours and the power status of the main display device).

During normal operation, a query

The list of queries appears in the Queries area in the Driver Manager:

, derived from the protocol of the main display, is sent to the

main display, regarding its lamp hours and/or power status. The main display sends the relevant

serial command back to the Master RC which includes the parameter details; the Master RC

interprets these commands according to the definition in the Query Details window and sends the

real time status to the Site-CTRL and Web Access.

• The Lamp Hour query monitors the lamp usage (in hours) of the main display (see Section

9.2.1

• The Power query monitors the power status of the main display (see

)

Section 9.2.2

To open the Query Details window:

)

1. Select the desired Query (Lamp Hour or Power) in the Queries area (for example, select Lamp

Hour):

Figure 158: Queries Area

2. Click the Query Details button. The Query Details window appears:

Or question