User's Manual

602T, 602R - Overview 3
3 Overview
The 602T and 602R are a small and lightweight fiber optic transmitter and receiver
pair for DVI signals. The 602T converts electrical signals to optical signals and the
602R decodes the optical signals back to electrical signals.
The 602T and 602R feature:
• Max. Data Rate - 1.65Gbps
• Max. Resolution - Up to WUXGA (1920x1200) @60Hz, 1080p
• Range - Up to 500m (1650ft) (multimode); up to 1500m (5000ft) (single-
mode)
• Cable - 2LC single or multi-mode fiber optic cable
• EDID Capture - Copies and stores the EDID from a display device
• Advanced Solution - Small and lightweight, indispensable asset in any digital
signage application
• Standards Compliance - Supports DVI1.0 and DDC2B, fully implemented by
fiber-optic communication
• Compliance with the limits for a Class A digital device, pursuant to part 15
and 2 of FCC and CE
• Not HDCP Compliant
• No EMI/RFI
• Size - NanoTools
3.1 Powering the 602T and the 602R
Your 602T/602R pair comes with two 5V DC power adapters. The 602R must
always be powered via the external power adapter. The 602T can take power from
the external power adapter or from the 5V pin on the DVI card in the computer.
However, when using most laptops or a computer with an express graphic card,
an external power adapter is required. The 602T automatically detects if it is being
powered via the external power adapter, and if so, the internal power supply cuts
off.