User manual

8
KW-11T/KW-11R - Connecting the KW-11T and KW-11R
Note: The HDCP status of the KW-11 follows that of the device connected to its
output.
To connect the KW-11T and the KW-11R as illustrated in the example in
Figure 3:
1. On the KW-11T connect:
 The HDMI source (for example, a VP-81SIDN or laptop computer) to
the HDMI connector
 The USB Power port on the VS-81SIDN to the Power port on the
KW-11T using the supplied USB power cable
2. On the KW-11R connect:
 The HDMI Out connector to the HDMI acceptor (for example, a
projector with speakers)
 The power adapter to the Power connector and plug the power adapter
into a mains power socket