User's Manual

KRAMER ELECTRONICS LTD.

NOTE

When clicking "Exit", the program automatically

stores the active port number. When the program is

run again, this port number automatically appears.

 S

ettings Sub Menu - Click on Settings. The Settings sub menu appears:

 P

ort - Defines the active serial port (COM1-COM4) to which the PIP-200 is connected. To select a port,

click on the Port button. When the Port screen appears, select the desired port and then click Ok.

 R

eset - Enables selection of two types of configurations: Power down, or Factory default:

 Clicking on Power down resets the machine and as a result the last saved settings appear on both the

screen and the front panel.

 Clicking on F

actory default resets the machine and as a result the Factory default settings appear on

both the screen and the front panel.