User's Manual
3
KRAMER ELECTRONICS LTD.
4.1 Optional Accessories
The following accessories, which are available from Kramer, can enhance implementation of your machine. For
information regarding cables and additional accessories, contact your Kramer dealer.
VS-5x4 - (5x4 Video/ Stereo Audio Matrix Switcher) can be serially connected between sources and the PIP-
200 for video and audio input switching. The VS-5x4 may also be used as one 1:4 or two 2:2 Y/C-video/audio
DAs or any other combination as well. The VS-5x4 switches during the vertical interval for smooth
transitions between genlocked sources. It is microprocessor and RS-232 controlled (software included), and is
operated by touching a keypad on the front panel. Front switches control the audio level of each output. Large
illuminated seven segment LED displays show the connection status of the machine at any given moment.
VS-4x4YC- (4x4 Composite/YC/Audio matrix) can be serially connected between the PIP-200 and its sources
or between the PIP-200 and the acceptor. The Kramer VS-4x4YC is a high performance 4x4 vertical interval
matrix switcher for composite and/or s-Video and stereo audio signals. It is a true matrix, allowing the user to
route any input to any or all outputs simultaneously. Since the VS-4x4YC switches during the vertical
interval, transitions are glitch-free when sources share common reference sync. The VS-4x4YC provides
composite video and
s-Video connectors allowing it to be used for either format. Mixing formats is possible
but composite video sources need to be routed to composite video outputs and s-Video sources must be routed
to s-Video outputs. It is important to note that the VS-4x4YC does not perform signal format conversion. Like
most Kramer switchers, the VS-4x4YC can be controlled by front panel buttons or RS-232 serial commands.
For applications requiring remote control via a Windows-based personal computer, K-Switch software is
provided at no additional cost. It is easy to use, dependable, rugged, and fits in one vertical space of a standard
19” rack.
VM-1411 (Video/Balanced Stereo Audio Distribution Amplifier) can be serially connected between the PIP-
200 processor and the acceptors for video and audio distribution. It is a full broadcast, state-of-the-art
machine, designed for studio and other applications. The VM-1411 has two inputs, video and audio, each
splitting to 5 outputs. The user may select 2 x 1:5 or 1:10 operation via front panel control switches. Several
VM-1411 units may be chained through the looping inputs. Output signals are (user selectable) DC or AC
coupled for maximum flexibility. Audio outputs are buffered and isolated from each other, allowing Hi-Fi
Balanced audio distribution.
SP-11 - (Video/Audio Processor) can be serially connected between the video/audio source and the PIP-200
processor for video and audio control/correction. The machine provides camera control and luminance/white
balance correction. The SP-11 is also capable of performing composite to Y/C conversion and bi-directional
transcoding. The machine allows full control over the video signal: video gain down to full fade, log or linear
definition control, log or linear contrast control, color saturation control, black level control, red, green and
blue controls and a screen splitter control for “before-after” comparison.
VIDEO TESTER - A unique, patented, indispensable tool for the video professional, the video Tester is used
to test a video path leading to/from an amplifier, switcher or processor. By pressing only one touch switch it
can trace missing signals, distinguish between good and jittery (VCR sourced) signals, and identify the
presence of good signals. Whenever a video signal is missing, because of bad connections, cable breaks or
faulty sources, the video Tester is all you need.