Kramer Electronics, Ltd.
Contents Contents 1 2 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 4 4.1 4.2 4.3 4.4 5 5.1 5.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Overview 3 Overview This section describes: • A summary of the PT-110 XGA Line Transmitter, see section 3.1 • A summary of the WP-110 XGA Line Transmitter, see section 3.2 • A summary of the PT-120 XGA Line Receiver, see section 3.3 • A summary of the TP-120 XGA Line Receiver, see section 3.4 • The power connect feature, see section 3.5 • Using shielded twisted pair (STP) / unshielded twisted pair (UTP), see section 3.6 • Recommendations for achieving the best performance, see section 3.7 3.
Overview 3.3 PT-120 XGA Line Receiver The Kramer Pico TOOLS PT-120 is an XGA line receiver that receives a coded CAT 5 signal transmitted by either the WP-110 or the PT-110, decodes it and converts it to an XGA output. In particular, the PT-120: • Has an operating range of more than 300ft (more than 100m) using standard CAT 5 cable and the WP-110 or the PT-110 • Includes EQ. and level controls • Has the power connect feature • Is 12V DC fed 3.
Overview 3.6 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) We recommend that you use Shielded Twisted Pair (STP) cable. There are different levels of STP cable available, and we advise you to use the best quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP is intended for analog signals where skewing is not an issue. For cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP, may be used.
Your XGA Line Transmitter(s) / Receiver 4 Your XGA Line Transmitter(s) / Receiver This section defines the XGA Line Transmitter(s) / Receiver: • PT-110 XGA Line Transmitter (see section 4.1) • WP-110 XGA Line Transmitter (see section 4.2) • PT-120 XGA Line Receiver (see section 4.3) • TP-120 XGA Line Receiver (see section 4.4) 4.
Your XGA Line Transmitter(s) / Receiver 4.
Your XGA Line Transmitter(s) / Receiver Table 2: WP-110 XGA Line Transmitter Features 1 # Feature XGA IN 15-pin HD (F) Connector 2 ON LED Illuminates when receiving power 3 HS3 Switch Slide the switch to the left 1 to change the HS polarity to (NEG.) negative polarity 2; slide the switch to the right (NORM.) to retain the polarity 4 VS 3 Switch Slide the switch to the left1 to change the VS polarity to (NEG.) negative polarity2; slide the switch to the right (NORM.
Your XGA Line Transmitter(s) / Receiver Table 3: PT-120 XGA Line Receiver Features # 1 2 3 4 5 6 Feature 12V DC XGA OUTPUT 15-pin HD (F) Connector ON LED LEVEL Trimmer EQ. 2 Trimmer LINE IN RJ-45 Connector 4.
Using the XGA Line Transmitter(s) / Receiver 5 Using the XGA Line Transmitter(s) / Receiver You can use the PT-110 1 XGA Line Transmitter and the TP-120 XGA Line Receiver to configure an XGA-to-Twisted Pair Transmitter and Receiver system. To connect the PT-110 XGA Line Transmitter with the TP-120 XGA Line Receiver, as the example in Figure 5 illustrates, do the following: 1.
Using the XGA Line Transmitter(s) / Receiver Figure 5: XGA-to-Twisted Pair Transmitter and Receiver System via UTP Cable 10 KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the XGA Line Transmitter(s) / Receiver 5.1 Installing the WP-110 XGA Line Transmitter To install your WP-110 XGA Line Transmitter: 1. Connect the LINE OUT RJ-45 connector to the pre-installed UTP wiring in the wall box opening that connects via UTP cabling to the LINE IN RJ-45 connector of the PT-120 or TP-120. 2. Connect your 12V DC power supply to the POWER SUPPLY pins 1, taking care that polarity is correct. 3.
Technical Specifications 6 Technical Specifications Table 6 lists the technical specifications: Table 6: Technical Specifications 1 of the PT-110 / WP-110 / PT-120 / TP-120 INPUTS: OUTPUTS: MAX. OUTPUT LEVEL: RESOLUTION: DIFF. GAIN 2: DIFF. PHASE2 K-FACTOR2: S/N RATIO2: CONTROLS: PT-110 1 VGA / UXGA on a 15-pin HD connector 1 RJ-45 LINE OUTPUT connector WP-110 1 VGA / UXGA on a 15-pin HD connector 1 RJ-45 LINE OUT connector PT-120 1 RJ-45 LINE IN connector 1 VGA / UXGA on a 15-pin HD connector 1.
LIMITED WARRANTY We warrant this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
