Instruction Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your XGA Line Transmitter(s) / Receiver
8
Table 3: PT-120 XGA Line Receiver Features
# Feature Function
1
12V DC
+12V DC connector for powering the unit
2 XGA OUTPUT 15-pin HD (F) Connector Connect to the XGA acceptor
3 ON LED Illuminates when receiving power
4 LEVEL Trimmer Adjusts
1
the output signal level
5 EQ.
2
Trimmer Adjusts
1
the cable compensation equalization level
6 LINE IN RJ-45 Connector Connects to the LINE OUT RJ-45 connector on the
PT-110 or WP-110 XGA Line Receiver
3
4.4 Your TP-120 XGA Line Receiver
This section describes the TP-120 XGA Line Receiver and its underside.
Figure 4
and Table 4 define the topside of the TP-120 XGA Line Receiver:
Figure 4: TP-120 XGA Line Receiver
Table 4: TP-120 XGA Line Receiver Features
# Feature Function
1
12V DC
+12V DC connector for powering the unit
2 XGA OUT 15-pin HD (F) Connector Connect to the XGA acceptor
3 LINE IN RJ-45 Connector Connects to the LINE OUT RJ-45 connector on the PT-110 or
WP-110 XGA Line Receiver
3
4 EQ.
2
Trimmer Adjusts
1
the cable compensation equalization level
5 LEVEL Trimmer Adjusts
1
the output signal level
6 ON LED Illuminates when receiving power
1 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level
2 Degradation and VGA/XGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a
total loss of sharpness in high-resolution signals
3 Using a UTP cable with CAT 5 connectors at both ends (the PINOUT is defined in Table 5
and Figure 6)