Instruction Manual

Your XGA Line Transmitter(s) / Receiver
7
Table 2: WP-110 XGA Line Transmitter Features
# Feature Function
1 XGA IN 15-pin HD (F)
Connector
Connect to the XGA source
2 ON LED Illuminates when receiving power
3 HS
3
Switch Slide the switch to the left
1
to change the HS polarity to (NEG.) negative
polarity
2
; slide the switch to the right (NORM.) to retain the polarity
4 VS
3
Switch Slide the switch to the left
1
to change the VS polarity to (NEG.) negative
polarity
2
; slide the switch to the right (NORM.) to retain the polarity
5 LINE OUT RJ-45
Connector
Connects to the LINE IN RJ-45 connector on the PT-120 or TP-120
XGA Line Receiver
4
6
POWER
SUPPLY
GND PIN Connect (-) to the Ground
+12V DC PIN Connect (+) to the connector for powering the unit
4.3 Your PT-120 XGA Line Receiver
This section describes the PT-120 XGA Line Receiver.
Figure 3
and Table 3 define the topside of the PT-120 XGA Line Receiver:
Figure 3: PT-120 XGA Line Receiver
1 By default, both switches are set to the right
2 Downgoing syncs
3 SYNC
4 Using a UTP cable with CAT 5 connectors at both ends (the PINOUT is defined in Table 5
and Figure 6)