User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-123EDID XGA / Audio / Data Line Transmitter
12
5.2 Controlling via RS-232 (for example, using a PC)
Prepare an RS-232 cable with a 9-pin D-sub connector at one end, and a 2-pin
terminal block connector at the other end, as defined in
Figure 5 and Table 4:
RxD
GND
PIN 5 Connected to GND
PIN 3 Connected to RxD
1
2
3
4
5
6
7
8
9
To PC ( )
9-pin D-sub
PC (Controller) to TP-123EDID
PIN 5 Connected to GND
PIN 2 Connected to TxD
TxD
GND
1
2
3
4
5
6
7
8
9
TP-124 to Controlled Unit
To PC ( )
9-pin D-sub
Figure 5: RS-232 PINOUT Connection
Table 4: RS-232 PINOUT Connection
Connect this PIN on the
Terminal Block
Connector:
To this PIN on the
9-pin D-sub
Connector
TxD PIN 2
RxD PIN 3
GND PIN 5
5.3 Technical Specifications
Table 5 includes the technical specifications
1
Table 5: Technical Specifications of the TP-123EDID
of the TP-123EDID:
INPUTS: Video: 1 VGA / UXGA on a 15-pin HD connector
Audio: 1 audio ANALOG 3.5mm mini jack
OUTPUT: 1 RJ-45 OUT connector
CONTROL: RS-232 2-pin terminal block
RS-232 BAUD RATE: Up to 19200kbps
BANDWIDTH (-3dB)
2
Audio: 20Hz to 20kHz @0.5dB :
RESOLUTION: Up to WUXGA and 1080p
S/N RATIO: VIDEO: 58dB unweighted, 68.3dB @5MHz weighted
Audio: <-80dB
TOTAL GAIN: Audio: Analog/analog: 0dB; Analog/SPDIF: –12dBFS
COUPLING: AC
TND+N: Audio: <0.01%
POWER SOURCE: 12V DC 60mA
DIMENSIONS: 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H
WEIGHT: 0.3kg (0.67lbs) approx.
ACCESSORIES: Power supply
OPTIONS: 19” rack mount adapter
1 Specifications are subject to change without notice
2 For the Transmitter/Receiver pair