User manual

Acquiring the EDID
21
21
9 Acquiring the EDID
The transmitter can acquire the EDID information from the display connected
to the transmitter or acquire the default EDID.
To acquire the display EDID, do the following:
1. Connect the XGA INPUT 15-pin HD connector to the input XGA
connector of the display, using a short cable
1
2. Connect the display power.
.
3. On the Transmitter, connect the 12V DC power adapter to the power socket
and connect the adapter to the mains electricity.
4. Press the EDID CAPTURE button.
5. Once the EDID STATUS blinks slowly several times, the EDID is
captured.
6. Disconnect the display.
To acquire the default EDID
2
1. On the Transmitter, connect the 12V DC power adapter to the power socket
and connect the adapter to the mains electricity.
:
2. Press the EDID CAPTURE button.
3. Once the EDID STATUS blinks rapidly several times, the default EDID is
captured.
Alternatively, you can press the EDID CAPTURE button after connecting the
transmitter receiver system. When the EDID STATUS LED blinks rapidly
several times, the default EDID information is acquired.
1 The EDID is carried over pins 12 and 15 of the VGA connector. It is essential that the cable used for capturing the EDID
passes all 15 pins
2 Do not connect the display to the transmitter when acquiring the default EDID