User manual

Your TP-121EDID XGA / Audio Line Transmitter

In particular, the TP-121EDID:

• Has a transmission range of more than 300ft (more than 100m), and a

20kHz audio bandwidth with an S/N ratio that exceeds 80dB on the same

transmission range

• Can power or be powered by the receiver over the same CAT 5 cable

• Is 12V DC fed

Figure 1 and Table 1 define the TP-121EDID:

Figure 1: TP-121EDID XGA / Audio Line Transmitter

Table 1: TP-121EDID XGA / Audio Line Transmitter Features

Feature

Function

1 12V DC +12V DC connector for powering the unit

2 AUDIO IN 3.5mm mini jack Connects to the audio source

3 LINE OUT RJ-45 connector Connects to

the LINE IN RJ-45 connector on a receiver

XGA IN 15-pin HD (F) connector Connect to the XGA source

5 EDID

CAPTURE Button Press to acquire the EDID information from the display

6 STATUS LED Illuminates during normal operation; blinks when

acquiring the EDID

7 ON LED Illuminates when receiving power

1 Using a CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 11 and Figure 11)

2 See section