Owner manual

SL-14RC/N – Contents i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
3 Overview 3
4 Defining the SL-14RC/N Master Controller 5
5 Defining the Remote Control Panels 7
5.1 Defining the RC-3TB Remote Control Panel 7
5.2 Defining the RC-3TBU Remote Control Panel 9
6 Installing in a Rack 11
7 Connecting the SL-14RC/N 12
7.1 Connecting the RS-232 Interface 13
7.2 Connecting the Ethernet Port 13
7.3 Connecting RC-3TB/U Remote Control Panels (Optional) 14
8 Operating the SL-14RC/N 16
9 Installing and Using RC-3TBU Configurator Software 17
9.1 Installing the RC-3TBU Configurator Software 17
9.2 Using the RC-3TBU Configurator Software 17
9.3 Saving and Loading a Configuration 19
10 Front Panel Button Caps and Labels 20
10.1 Installing the Front Panel Button Caps and Labels 21
10.2 Replacing the Front Panel Button Labels 21
11 Technical Specifications 22
Figures
Figure 1: SL-14RC/N Master Controller Front Panel 5
Figure 2: SL-14RC/N Master Controller Rear Panel 6
Figure 3: RC-3TB Remote Control Panel Components 7
Figure 4: RC-3TBU Remote Control Panel Components 9
Figure 5: Connecting the SL-14RC/N Master Controller 12
Figure 6: RS-232 Connection 13
Figure 7: K-NET to RC-3TB/U Connection 14
Figure 8: Daisy-chaining Multiple RC-3TB/U Panels 15
Figure 9: RC-3TBU Connection Method Window 18
Figure 10: RC-3TBU Configurator Software Switch Drop-down List 18
Figure 11: Saving and Loading Projects 19
Figure 12: Sample Button Label Sheet 20