Owner's manual

Customizing the Controllers' Buttons and Labels
17
17
6.2 Inserting the Button Labels
To insert a button label, do the following:
1. Unscrew the faceplate attachment screws using a screwdriver, as
Figure
12 illustrates:
Unscrew the faceplate
attachment screws
Figure 12: Unscrewing the Faceplate Attachment Screws
2. Insert the label under the button cap.
3. Place the button cap with the label onto the button base.
6.3 Replacing a Button Label
To replace a button label, do the following:
1. Unscrew the faceplate attachment screws, using a screwdriver, as
Figure
12 illustrates (see above).
2. Gently remove the transparent button cap with your fingers, or using
adhesive tape.
3. Insert the replacement label under the button cap.
4. Replace the button cap with the label onto the button base.