Owner manual

Connecting to the RC Device
13
6 Connecting to the RC Device
Table 3 defines the connecting ports available for each machine and the
connecting methods:
Table 3: Machine Connection Method
The Machine Name The Connection Port The Connection Method
RC-8IR, RC-8IRE Ethernet, RS-232 Discover (see section 6.1)
Connect (See section
6.2)
RC-6IR, RC-6IRE
RC-6IRP, RC-8IRP
RC-8RK, RC-8RKL
VP-23RC
RC-7B, RC-7BE 3.5mm Serial
configuration Jack
Connect (See section 6.2)
RC-7LC, RC-7LCE
RC-7RL, RC-7RLE
6.1 The “Discover” Connection Method
To connect the RC device to your PC via the Discover connection method, do
the following:
1. Connect the RC device to the PC via the Ethernet port, as described in section
10.3.
2. Click the appropriate shortcut in the Start menu’s Programs folder.
The Kramer RC Configuration main window opens.
3. Open the Device menu and click Discover
1
4. The Device Selection dialog box lists the devices found, and their IP number
(see
.
The Device Selection window opens.
Figure 8). Select the device and then click OK.
Figure 8: Connecting a Device to your PC – Device Selection Dialog Box
1 To automatically search for devices