Owner manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Creating a Driver Command
16
7 Creating a Driver Command
You can write new driver commands via the Driver Manager window. You
can write two types of commands for a device (for example, a DVD player,
projector, A/V receiver, and so on):
• Serial commands (see section
7.1)
• IR commands (see section
7.2)
7.1 Creating a Serial Command
To write the serial commands for a selected device:
1. Click the New button in the Serial Commands area.
The New Serial Command window appears.
2. Type the new command name:
A Serial command type area appears, as illustrated in
Figure 13.
Figure 12: New Serial Command Window
3. Type in the command string in the command area.
You can test the serial commands from the driver manager, using a local serial
port.
Figure 13: Writing the Serial Commands
The serial commands created can be sent via RS-232, RS-485 and Ethernet
ports.