Owner manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Port Mapping
22
Figure 19: The Port Manager Window
Table 4: The Port Manager Window Features
The Item
Description
Port Lists the number of ports available for the selected machine
Description Type a description of the port
Settings For serial ports, press the white area to open the serial Settings window and define the baud
rate and parity
For Ethernet ports, press the white area to open the Ethernet Settings window and define the
IP address and TCP port
Default Driver
Press the white area to open the Drivers Tree window and select the default driver for this port
Press to clear the Default Driver data
Reset Press to reset to default definitions
You can also set or update the port default driver settings in the RC Command
area by clicking the Update button, as illustrated in
Figure 20:
Figure 20: Setting the Default Driver