Owner manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Contents
ii
11.4.1 The Discover Command 43
11.5 The Help Menu 44
12 Assigning the Macros to the RC Device 45
12.1 Saving a Configuration 45
12.2 Writing a Configuration to the RC Device 45
13 Installation of the RC System 46
13.1 Connecting the RS-232 Port 46
13.2 Connecting the RS-485 Port 47
13.3 Connecting the Relays 47
13.4 Connecting the IR Emitter 48
13.5 Inserting the Button Labels 48
14 Ethernet Flash Memory Upgrade 48
14.1 Uploading the Applet 49
15 The UDP Protocol 50
Figures
Figure 1: Media Room Components List 5
Figure 2: Driver Data Base Notice
7
Figure 3: Setting a Working Directory
7
Figure 4: The Driver Manager Window Prior to Installing the Drivers 9
Figure 5: Importing a Kramer Driver File
9
Figure 6: Exporting a Kramer Driver File
10
Figure 7: The Driver Manager Window
11
Figure 8: Connecting a Device to your PC – Device Selection Dialog Box 13
Figure 9: The Connection Method – via the Ethernet
14
Figure 10: The Connection Method – via the Serial Port
14
Figure 11: Kramer RC Configuration – Set Device Details Dialog Box
15
Figure 12: New Serial Command Window 16
Figure 13: Writing the Serial Commands
16
Figure 14: Initializing the IR Learner Procedure
18
Figure 15: New IR Command Window
20
Figure 16: Creating the IR Commands 20
Figure 17: The IR Command Area
20
Figure 18: The Kramer VP-724xl in the RC Command Area
21
Figure 19: The Port Manager Window
22
Figure 20: Setting the Default Driver 22
Figure 21: Updating the Port Default Driver
23
Figure 22: Updated Port Manager Window
23
Figure 23: The Kramer RC Configuration Main Window
24
Figure 24: Event Macros Tab 27
Figure 25: Using the Toggle 1-2-3-4 Behavior
27
Figure 26: Selecting a Button to Write a Macro
28
Figure 27: Creating a New Command
28
Figure 28: Selecting the Port 29