Owner manual

Creating a Macro
35
10.2.4 The Self Command
The self command is used to change the toggle state of another button. The
example in
Figure 35 shows the front panel tab of an RC-8IR device:
Figure 35: Self Command Front Panel Setting
Button 3 and button 7 are labeled DVD and VCR respectively. Buttons 5 and
6 are labeled Play and Stop respectively, their behavior is set to 2 toggle states
and the Automatic Advance box is not checked.
The Play button macros consist of a:
• Toggle 1 macro that includes a Play command for the VCR player
• Toggle 2 macro that includes a Play command for the DVD player
The Stop button macros consist of a:
• Toggle 1 macro that includes a Stop command for the VCR player
• Toggle 2 macro that includes a Stop command for the DVD player
For both the Play and Stop buttons the Automatic Advance check box must
NOT be checked.