User guide

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
3 Overview 1
4 Your Universal Room Controller 3
5 Using Your Universal Room Controller 5
5.1 Operating the RC-8IR 8
5.2 An Example of Operating the RC-8IR 9
5.3 Using the Macro Buttons 10
5.4 Locking the Front Panel 10
5.5 Turning the Light of the Backlit Buttons On and Off 10
5.6 Using the Internal Web Page 11
6 Flash Memory Upgrade 11
6.1 Downloading from the Internet 11
6.2 Connecting the PC to the RS-232 Port 12
6.3 Upgrading Firmware 12
6.4 Installing the Web Applet 13
7 Technical Specifications 13
Figures
Figure 1: RC-8IR and RC-6IR Front Panels 3
Figure 2: RC-8IR and RC-6IR Right Side Panel 4
Figure 3: RC-8IR and RC-6IR Rear Panel 5
Figure 4: Example of a Typical RC-8IR Configuration 6
Figure 5: Example of a Typical RC-8IR Setup in the Lecture Auditorium 7
Figure 6: RC-8IR Labels Setup 8
Figure 7: RC-8IR Operation Example 9
Figure 8: Internal Web Page Front Panel 11
Figure 9: The KFR-Programmer Window 12
Tables
Table 1: RC-8IR and RC-6IR Front Panel Features 3
Table 2: RC-8IR and RC-6IR Right Side Panel Features 4
Table 3: RC-8IR and RC-6IR Rear Panel Features 5
Table 4: Connection Scheme (for the example in Figure 4) 7
Table 5: The Commands Configuration 8
Table 6: Technical Specifications of the Universal Room Controller Series 13