User manual

Installing Your Kramer Rack Adapters
3
5.1 Installing Wall Plates on the RK-121WP
The example in Figure 1 shows how to mount wall plates in the 19” 2U
RK-121WP rack adapter, including the optional insertion of blank plates.
Use the M3x10 flat-head screws (supplied with the unit) to install the required
wall plates on the rack adapter.
M3x10 FLAT HEAD
SCREW
2 Gang Blank Plate
(Optional)
1 Gang Blank Plate
1 Gang WP (UK)
2 Gang WP (Europe)
1 Gang WP (Europe)
Figure 1: Installing the RK-121WP Rack Adapter
Instead of inserting a wall plate, you can use a blank plate to cover the
relevant opening. If required, you can order additional blank plates to cover
other openings.
After installing the wall plates, the unit is ready to be mounted on a 19” rack
shelf.