user manual

PT-571HDCP/PT-572HDCP+ - Overview

3 Overview

The PT-571HDCP is a DGKat™ twisted pair transmitter for DVI signals. The

PT-571HDCP converts a DVI signal to a single twisted pair signal and the

PT-572HDCP+ converts the twisted pair signal back to a DVI signal.

The DVI Line Transmitter/Receiver system features:

 Maximum data rate/bandwidth up to 4.95Gbps (1.65Gbps per graphic

channel), WUXGA, 1920x1080p

 HDTV compatibility and HDCP compliance

 Medical equipment compliance

 EDID PassThru that passes EDID signals between the source and display

 3D pass-through

 Up to 90m (295ft) at SXGA, or up to 30m (98ft) at UXGA on shielded

BC−DGKat524 cable. Up to 90m (295ft) at SXGA, or up to 70m (230ft) at

UXGA on shielded BC−DGKat623 cable. Up to 100m (330ft) at SXGA, or up

to 80m (265ft) at UXGA on shielded BC−DGKat7a23 cable

Note that the transmission range depends on the signal resolution, graphics card and

display used. The distance using non-Kramer CAT 5, CAT 6 and CAT 7a cables may

not reach these ranges

 DGKat™ Signal Integration – Kramer’s unique technology for converting

TMDS as well as control and communication to signals that run over twisted

pair cables

 Power Connect™ that feeds 12V DC over the CAT 5 cable from transmitter

to receiver (see Section 3.2)

 Ultra-Compact Pico TOOLS™ – 4 units can be rack mounted side−by−side

in a 1U rack space with the optional RK−4PT rack adapter.

Use only shielded cable where both ends of the shield are soldered

to ground to eliminate ESD interface.