Owner's manual

6 SID-X1 - Defining the SID-X1 Step-in Commander
Figure 2 defines the rear panel of the SID-X1.
Figure 2: SID-X1 Step-in Commander Rear Panel
# Feature Function
1 TP OUT RJ-45 Connector Connect to a compatible switcher, for example, VP-81SID using
CAT 6 or higher specification cable
2 REMOTE STEP-IN 3-way
Terminal Block
Connect to the remote, contact closure step-in switch and LED
(see Section
5.1)
3 REMOTE SELECT 3-way
Terminal Block
Connect to the remote, contact closure input selection switch and
LED (see Section
5.2)
4 HDMI, DP, DVI, UXGA,
GND, LED ANODES
5-way Terminal Block
Connect to the remote input indicator LEDs (see Section 5.3).
Note: All LED supplies include a current limiting resistor and are
designed to work with any standard LED
5 OPTION DIP-switches DIP-switch 1, 2—audio mode selection (See Section 5.4)
DIP-switch 3—no function
DIP-switch 4—EDID lock (See Section
5.4)
6 12V DC Power Connector Connect to supplied power adapter, center pin positive