Instruction Manual

SID-X1N – Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Shielded Twisted Pair/Unshielded Twisted Pair 3
2.4 Recycling Kramer Products 3
3 Overview 4
4 Defining the SID-X1N Step-in Commander 5
5 Connecting the SID-X1N 7
5.1 Connecting the Remote Step-In Switch and LED 8
5.2 Connecting the Remote Select Switch and LED 9
5.3 Connecting the Remote Input Selection LEDs 10
6 Principles of Operation 11
6.1 Video Input Selection 11
6.2 Audio Signal Control 12
7 Operating the SID-X1N 13
7.1 Manually Selecting an Input 13
7.2 Taking Control of the Switcher Input 13
7.3 Locking the EDID 14
8 Configuring and Maintaining the SID-X1N 15
8.1 Setting the Configuration DIP-switch 15
9 Wiring the Twisted Pair RJ-45 Connectors 16
10 Technical Specifications 17
Figures
Figure 1: SID-X1N Step-in Commander Front Panel 5
Figure 2: SID-X1N Step-in Commander Rear Panel 6
Figure 3: Connecting the SID-X1N Step-in Commander 7
Figure 4: Remote Step-In Switch and LED Wiring 8
Figure 5: Remote Select Switch and LED Wiring 9
Figure 6: Remote Input Indicator LED Connections 10
Figure 7: Example of a Remote Input Indicator LED Wiring for the DVI Input 10
Figure 8: The Configuration DIP-switch 15
Figure 9: TP Pinout Wiring 16