User manual

SID-X1N - Principles of Operation
13
13
6.2 Audio Signal Control
The Option DIP-switches 2 and 3 (see Section 8.1) control the manner in which
audio is handled.
The following table describes which audio signal is embedded in the output.
DIP-switch
2
DIP-switch
3
3.5mm Mini Jack
Input
Audio on Output
On/Off
On/Off
On/Off
VGA
3.5mm mini jack
Off
On/Off
Inserted
HDMI/DP/DVI
3.5mm mini jack
Not inserted
Embedded HDMI/DP/DVI
On
On/Off
Inserted/Not inserted
HDMI/DP
Embedded HDMI/DP
On
Off
Inserted/Not inserted
DVI
Embedded DVI
On
On
Inserted/Not inserted
3.5mm mini jack
6.3 Automatic Output Shutdown
The SID-X1N can disable the output (signal and 5V) when there is no signal for a
specified period in:
 Manual mode— on the currently selected input
 Automatic mode—on any input
The delay period is set by the DIP-switch, (see Section 8.1). At the end of this
period, both the output signal and the power supply to other devices (via
PowerConnect) are disabled.
The return of an input signal on either the currently selected input (in manual
mode), or on any input (in automatic mode), immediately re-activates the output
and turns on PowerConnect.