User guide
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the SID-X2N Step-in Commander
- 5 Connecting the SID-X2N
- 6 Principles of Operation
- 7 Operating the SID-X2N
- 8 Configuring and Maintaining the SID-X2N
- 9 Wiring the Twisted Pair RJ-45 Connectors
- 10 Technical Specifications
- 11 Default EDID
- 12 Protocol 3000
8
SID-X2N - Connecting the SID-X2N
5 Connecting the SID-X2N
Switch off the power to all devices before connecting them to your
SID-X2N. After connecting your SID-X2N connect the power to other
devices.
Figure 3: Connecting the SID-X2N Step-in Commander
To connect the SID-X2N and the as illustrated in Figure 3:
1. Connect up to four video sources (HDMI, DisplayPort, DVI and PC graphics)
to the video input connectors.
i