User guide
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the SID-X2N Step-in Commander
- 5 Connecting the SID-X2N
- 6 Principles of Operation
- 7 Operating the SID-X2N
- 8 Configuring and Maintaining the SID-X2N
- 9 Wiring the Twisted Pair RJ-45 Connectors
- 10 Technical Specifications
- 11 Default EDID
- 12 Protocol 3000
SID-X2N - Protocol 3000
25
25
12.2 Kramer Protocol 3000 Commands
The following table lists the Protocol 3000 commands that the SID-X2N supports.
For a full description of the commands, see the Kramer Protocol 3000 document
available from http://www.kramerelectronics.com.
Note: The SID-X2N can only receive commands from a device, (for example, an
HDBT receiver) via the HDBaseT link, and only at 9600bps.
Command
Description
#
Protocol handshaking
MODEL?
Read device model
VID
set video switch status
VID?
Get video switch status