Manualshelf

Instruction Manual

ManualsBrandsKramer Electronics ManualsAudioSP-12HD
12345678910
Your SP-12HD HD-SDI Processor
7
7
Feature
Function
19 V/RED Button Press the V
1
/RED
2
20
button and adjust using the + and – buttons,
when COLOR SPACE button is activated
COLOR SPACE Button Press to select the color space of color control; if the COLOR
SPACE button doesn’t illuminate, color control is disabled in any
color space
21 YUV/RGB LEDs Cycle between different color spaces of color control: YUV and
RGB. The corresponding LED lights
22 STORE Button Stores the current setup in the non-volatile memory
3
23
RECALL Button Recalls a setup from the non-volatile memory
3
24 7-segment Display Displays data when using a front panel button
25 - Button Press to decrease the level
26 + Button Press to increase the level
27 PANEL LOCK Button Disengages/engages the front panel buttons (press and hold
down for 2 seconds to toggle)
28
INPUTS
Y/C 4-pin Connector Connects to the s-Video source
29 Y BNC Connector Connects to the Y component of the YUV source
30 CV BNC Connector Connects to the composite video source
31 V(R-Y) BNC Connector Connects to the V component of the YUV source
32 U(B-Y) BNC Connector Connects to the U component of the YUV source
33 HD-SDI BNC Connector Connects to the HD-SDI source
34
OUTPUTS
SPLITTER Y BNC Connector Connects to the split image Y component of the YUV acceptor
35 SPLITTER CV BNC Connector Connects to the split image CV acceptor
36 SPLITTER V BNC Connector Connects to the split image V component of the YUV acceptor
37 SPLITTER U BNC Connector Connects to the split image U component of the YUV acceptor
38 HD/SDI BNC Connector Connects to the serial digital video acceptor 1
39 HD/SDI BNC Connector Connects to the serial digital video acceptor 2
40 YC 4-pin Connector Connects to the s-Video (Y/C) acceptor
41 Y BNC Connector Connects to the Y input of the YUV acceptor
42 CV BNC Connector Connects to the composite video acceptor
43 U(B-Y) BNC Connector Connects to the U input of the YUV acceptor
44 V(R-Y) BNC Connector Connects to the V input of the YUV acceptor
45 RS-232 Port Connects to the PC or the remote controller
46 SETUP DIP-switches Use to configure and test the unit (see section 6.2)
47 Power Connector with Fuse AC connector enabling power supply to the unit
48 Power Switch Illuminated switch for turning the unit ON or OFF
1 For YUV
2 For RGB
3 See section
7.1