Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 6 6.1 6.2 7 8 9 9.1 Introduction Getting Started Recycling Kramer Products Overview Shielded Twisted Pair and Unshielded Twisted Pair Defining the Wall Plates (U.S. Versions) SV-301 (U.S.) SV-301xl (U.S.) SV-302 (U.S.) SV-303 (U.S.) SV-304 (U.S.) SV-305 (U.S.) SV-306 (U.S.) SV-307 (U.S.) Defining the Wall Plates (U.K. and Europe) SV-301 (U.K. and Europe) SV-301xl (U.K. and Europe) SV-302 (U.K.
Contents Table 8: SV-307 (U.S.) Front and Rear View Table 9: SV-301 (U.K. and Europe) Front and Rear View Table 10: SV-301xl (U.K. and Europe) Front and Rear View Table 11: SV-302 (U.K. and Europe) Front and Rear View Table 12: SV-303 (U.K. and Europe) Front and Rear View Table 13: SV-304 (U.K. and Europe) Front and Rear View Table 14: SV-305 (U.K.and Europe) Front and Rear View Table 15: SV-306 (U.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Overview facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/. 3 Overview This user manual describes the: • SV-301 provided as the default wall plate with the SV-551 SummitView™ Essentials Kit and described in that user manual, as well as in Section 4.1 (U.S. version) and Section 5.1 (U.K.
Defining the Wall Plates (U.S. Versions) 3.1 Shielded Twisted Pair and Unshielded Twisted Pair We recommend that you use Shielded Twisted Pair (STP) cable. There are different grades of STP cable available, and we advise you to use the best quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP is intended for digital signals and for analog signals where skewing is not an issue. For cases where skewing occurs, our UTP skew-free cable, Kramer BC-XTP, should be used.
Defining the Wall Plates (U.S. Versions) 4.1 SV-301 (U.S.) The SV-301 is a single-gang wall plate insert and has two RJ-45 connectors at the rear. Table 1 defines the front and rear views of the SV-301. Table 1: SV-301 (U.S.) Front and Rear View SV-301 Front View # 4 Feature SV-301 Rear View Function Lights red when receiving power (when no signal is detected); lights green when receiving a signal 1 ON LED 2 COMPUTER IN 15-pin HD Connect to the computer graphics source Connector 3 AUDIO IN 3.
Defining the Wall Plates (U.S. Versions) 4.2 SV-301xl (U.S.) The SV-301xl is a single-gang wall plate insert and has an RJ-45 connector at the rear and a power connector on the side. EDID information can be stored in the wall plate by using the FC-200 XGA EDID Copier Kramer Tool (see the FC-200 XGA EDID Copier User Manual). Table 2 defines the front and rear views of the SV-301xl. Table 2: SV-301xl (U.S.
Defining the Wall Plates (U.S. Versions) 4.3 SV-302 (U.S.) The SV-302 is a single-gang wall plate insert and has an RJ-45 connector at the rear. Table 3 defines the front and rear views of the SV-302. Table 3: SV-302 (U.S.
Defining the Wall Plates (U.S. Versions) 4.4 SV-303 (U.S.) The SV-303 is a single-gang wall plate insert and has an RJ-45 connector at the rear. Table 4 defines the front and rear views of the SV-303. Table 4: SV-303 (U.S.
Defining the Wall Plates (U.S. Versions) 4.5 SV-304 (U.S.) The SV-304 is a single-gang wall plate insert and has two RJ-45 connectors at the rear. Table 5 defines the front and rear views of the SV-304. Table 5: SV-304 (U.S.
Defining the Wall Plates (U.S. Versions) 4.6 SV-305 (U.S.) The SV-305 is a single-gang wall plate insert and has two RJ-45 connectors at the rear. Table 6 defines the front and rear views of the SV-305. Table 6: SV-305 (U.S.
Defining the Wall Plates (U.S. Versions) 4.7 SV-306 (U.S.) The SV-306 is a single-gang wall plate insert and has an RJ-45 connector at the rear. The SV-306 provides EDID PassThru and HDCP support (passes EDID signals from source to display). In order to operate the IR when no HDMI signal is present, the HDMI cable must be connected between the source and the SV-306. Note: The SV-306 uses special twisted pair cable (see Section 6). Table 7 defines the front and rear views of the SV-306. Table 7: SV-306 (U.
Defining the Wall Plates (U.S. Versions) 4.8 SV-307 (U.S.) The SV307 is a triple-gang wall plate and has an RJ-45 connector and a power connector at the rear. Note: The SV-307 uses special twisted pair cable (see Section 6). Table 8 defines the front and rear views of the SV-307. Table 8: SV-307 (U.S.) Front and Rear View SV-307 Front View SV-307 Rear View # 1 Feature DVI IN Connector Function 2 AUDIO IN 3.
Defining the Wall Plates (U.K. and Europe) 5 Defining the Wall Plates (U.K. and Europe) This section defines the U.K. and European version of the following wall plates: • SV-301 (Section 5.1) • SV-301xl (Section 5.2) • SV-302 (Section 5.3) • SV-303 (Section 5.4) • SV-304 (Section 5.5) • SV-305 (Section 5.6) • SV-306 (Section 5.7) 5.1 SV-301 (U.K. and Europe) The SV-301 is a single-gang wall plate and has a terminal block at the rear. Table 9 defines the front and rear views of the SV-301.
Defining the Wall Plates (U.K. and Europe) 5.2 SV-301xl (U.K. and Europe) The SV-301xl is a single-gang wall plate and has a terminal block at the rear. EDID information can be stored in the wall plate by using the Kramer FC-200 XGA EDID Copier (see the FC-200 XGA EDID Copier User Manual). Table 10 defines the front and rear views of the SV-301xl. Table 10: SV-301xl (U.K.
Defining the Wall Plates (U.K. and Europe) 5.3 SV-302 (U.K. and Europe) The SV-302 is a single-gang wall plate and has a terminal block at the rear. Table 11 defines the front and rear views of the SV-302. Table 11: SV-302 (U.K.
Defining the Wall Plates (U.K. and Europe) 5.4 SV-303 (U.K. and Europe) The SV-303 is a single-gang wall plate and has a terminal block at the rear. Table 12 defines the front and rear views of the SV-303. Table 12: SV-303 (U.K.
Defining the Wall Plates (U.K. and Europe) 5.5 SV-304 (U.K. and Europe) The SV-304 is a dual-gang wall plate and has two terminal blocks at the rear. Table 13 defines the front and rear views of the SV-304. Table 13: SV-304 (U.K.
Defining the Wall Plates (U.K. and Europe) 5.6 SV-305 (U.K. and Europe) The SV-305 is a dual-gang wall plate and has two terminal blocks at the rear. Table 14 defines the front and rear views of the SV-305. Table 14: SV-305 (U.K.
Defining the Wall Plates (U.K. and Europe) 5.7 SV-306 (U.K. and Europe) The SV-306 is a single-gang wall plate and has a terminal block and power connector at the rear. The SV-306 provides EDID PassThru and HDCP support (passes EDID signals from source to display). In order to operate the IR when no HDMI signal is present, the HDMI cable must be connected between the source and the SV-306. Note: The SV-306 uses special twisted pair cable (see Section 6.1).
Wiring the Rear Wall Plate Connectors 6 Wiring the Rear Wall Plate Connectors STP cabling of 50' (15.24m)1 in length is provided (SV-301/302) with the Kramer A/V SummitView™ Kits2. When required, longer STP cabling can be used when purchased for standalone wall plates but we recommend a maximum transmission range of up to 100' (30.48m). Exceeding the recommended distance may result in reduced image quality.
Wiring the Rear Wall Plate Connectors 6.1 Wiring the TP Line In/Line Out RJ-45 Connector This section defines the TP pinout using a straight pin-to-pin cable with RJ-45 connectors. EIA /TIA 568B 1 PIN Wire Color Orange / White 2 Orange 3 Green / White 4 Blue 5 Blue / White 6 Green 7 Brown / White 8 Brown ! 6.2 Figure 3: TP Pinout Wiring Warning: Using a TP cable that is incorrectly wired will cause permanent damage to the device Wiring the U.K.
Grounding the Wall Plate Figure 4: Terminal Block Pinouts (U.K. and Europe) SV-301, SV-304, SV-305 SV-301xl, SV-302, SV-303, SV-306 Notes: • The PC and Video terminal blocks have 9 contacts and the DDC terminal block has 8 contacts • Use the connector clips when removing the wires, not when inserting them • Each wire protrudes 9mm in length from the plastic insulation so that it can be easily connected.
Wall Plate and Switcher Compatibility To ground a wall plate: 1. Connect the Ring Tongue terminal to the building grounding point wire (it is recommended to use a green-yellow AWG#18 wire, crimped with a proper hand-tool). 2. Insert the M3x6 screw through the toothed lock washers and the tongue terminal in the order shown above. 3. Insert the M3x6 screw (with the two toothed lock washers and ring tongue terminal) into the grounding screw hole and tighten the screw.
Summary of Recommended Cables Item 1 2 CP-STP-50/C-STP-50 (2 cables ) 3 C-MGM/MGM-3 (1 cable) SV-302 Cable set CP-STP-50/C-STP-50 (1 cable1)2 3 C-RVM/RVM-3 (1 cable) SV-303 Cable set CP-STP-50/C-STP-50 (2 cables1)2 C-MGM/MGM-3 (1 cable)3 SV-304 Cable set CP-STP-50/C-STP-50 (2 cables1)2 3 C-MGM/MGM-3 (1 cable) SV-305 Cable set CP-STP-50/C-STP-50 (2 cables1)2 3 C-MGM/MGM-3 (1 cable) SV-306 Cable set BCP-DGKat5242, 1 C-DM/DM-3 3 18F C-HDMI/DVI-3 (1 cable) SV-307 Cable set 2, 3 BCP-DGKat524 4 C-DM/DM-3 19F 20
For the latest information on our products and a list of Kramer distributors, visit our Web site www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments, and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution P/N: 2900- 000604 Rev: 4 Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
