Owner's manual

Defining the Wall Plates (U.S. Versions)
11
4.8 SV-307 (U.S.)
The SV307 is a triple-gang wall plate and has an RJ-45 connector and a power
connector at the rear.
Note: The SV-307 uses special twisted pair cable (see Section
6
).
Table 8 defines the front and rear views of the SV-307.
Table 8: SV-307 (U.S.) Front and Rear View
SV-307 Front View
SV-307 Rear View
#
Feature
Function
1 DVI IN Connector Connect to the DVI source
2 AUDIO IN 3.5mm Mini
Connector
Connect to the audio source
3 ON LED Lights red when receiving power (when no signal is detected); lights
green when receiving a signal
4 GND +12V 2-pin Power
Terminal Block
Connect to an optional 12V power supply
5 GROUND Connection Ring tongue terminal and grounding screw
6 LINE OUT RJ-45 Connector Connect to the SV-552 Processor/Controller. Note that the SV-307
requires BC-DGKat524 or BC-DGKat-623 cable for connection