Owner's manual

Defining the Wall Plates (U.K. and Europe)
13
5.2 SV-301xl (U.K. and Europe)
Front and Rear View
The SV-301xl is a single-gang wall plate and has a terminal block at the rear.
EDID information can be stored in the wall plate by using the Kramer FC-200
XGA EDID Copier (see the FC-200 XGA EDID Copier User Manual).
Table 10 defines the front and rear views of the SV-301xl.
Table 10: SV-301xl (U.K. and Europe)
1
SV-301xl Front View
Front and Rear View
SV-301xl Rear View
2
#
Feature
Function
1 ON LED Lights red when receiving power (when no signal is detected);
lights green when receiving a signal
2 COMPUTER IN 15-pin HD
Connector
Connect to the computer graphics source
3 AUDIO IN 3.5mm Mini
Connector
Connect to the audio source
4 Ground Connection Ring tongue terminal and grounding screw
5 Terminal Block Connect to SV-551/SV-552 Processor/Controller
6 GND +12V 2-pin Power
Terminal Block
Connect to an optional 12V power supply
1 When mounting in Belgium and Germany, use the standard WP Adapter
2 Some models may have a DC IN connector