Owner's manual

Wiring the Rear Wall Plate Connectors
19
6 Wiring the Rear Wall Plate Connectors
STP cabling of 50' (15.24m)
1
in length is provided (SV-301/302) with the Kramer A/V
SummitView™ Kits
2
Note: For cabling the SV-306 and SV-307 wall plates, use either Kramer
BCP-DGKat524 or BCP-DGKat623 (see Section
. When required, longer STP cabling can be used when purchased for
standalone wall plates but we recommend a maximum transmission range of up to 100'
(30.48m). Exceeding the recommended distance may result in reduced image quality.
9.1).
This section describes how to connect the rear panel for the:
• US wall plate versions (see
Section 6.1
• European wall plate versions (see
)
Section 6.2
)
1 Plenum-rated for the SummitView™ US version; non-plenum for the SummitView™ Europe
2 Or should be purchased separately for a standalone machine, see
Table 18 for reference