Owner's manual

Defining the Wall Plates (U.S. Versions)

4.2 SV-301xl (U.S.)

The SV-301xl is a single-gang wall plate insert and has an RJ-45 connector at the

rear and a power connector on the side. EDID information can be stored in the wall

plate by using the FC-200 XGA EDID Copier Kramer Tool (see the FC-200 XGA

EDID Copier User Manual).

Table 2 defines the front and rear views of the

SV-301xl.

Table 2: SV-301xl (U.S.) Front and Rear View

SV-301xl Front View

SV-301xl Rear View

Feature

Function

1 ON LED Lights red when receiving power (when no signal is

detected); lights green when receiving a signal

2 COMPUTER IN 15-pin HD Connector Connect to the computer graphics source

3 AUDIO IN 3.5mm Mini Connector Connect to the audio source

4 RJ-45 Connector Connect to the SV-551/SV-552 Processor/Controller

5 DC IN Power Connector Connect to an optional 12V power supply

Figure 1 defines the SV-301xl as an example, in its plastic frame.

Figure 1: Wall Plate (U.S.) Enclosed in its Plastic Frame3F

1 Each model that is designed specifically for the U.S. market can be mounted inside a plastic frame