Owner's manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The RC Configuration Software
14
4.3 Creating a Driver Command
Create serial and IR commands
Driver commands are written via the connectors specific to each of the
machines, as defined in
Table 3:
Table 3: Connectors Available for Driver Commands
Machine Name
Connectors Available
Connection Method
SV-551 ETH, USB Ethernet, USB
RC-6x USB USB
RC-2 RS-232 Serial
RC-2C RS-232 Serial
FC-29 USB USB
RC-52 USB USB
You can write two types of commands to a connected device (for example, a
DVD, or a Kramer machine):
• Serial commands (see section
4.3.1)
• IR commands (see section
4.3.2)
4.3.1 Creating a Serial Command
To write the serial commands for the selected device, click the New button in
the Serial Commands area. The New Serial Command window appears. Type
the new command name:
Figure 9: New Serial Command Window
A Serial Command type area appears, as illustrated in Figure 10.