Owner's manual

Contents
i
Contents
1 Introduction 1
1.1 Quick Start 2
2 Overview 3
2.1 System Requirements for the Kramer RC-SV Configuration Software 4
2.1.1 System Requirements 4
2.1.2 Operating Systems 4
3 Initial Planning 4
4 The RC Configuration Software 5
4.1 Installing the Software 6
4.2 Downloading and Installing the Drivers 8
4.2.1 Download the Drivers 8
4.2.2 Install the Drivers 8
4.3 Creating a Driver Command 14
4.3.1 Creating a Serial Command 14
4.3.2 Creating an IR Command 15
4.4 Port Mapping 18
4.5 The Kramer RC-SV Configuration Main Window 20
4.5.1 The Tab Area 22
4.5.2 Scheduling 23
4.5.3 The RC Command Area 23
5 Creating a Macro 27
5.1 Labeling the Buttons 29
5.2 Creating a Driver Command 29
5.2.1 An RS-232 Command – Switch Input to Output 30
5.2.2 A LIGHT Command – Select the Button behavior 30
5.2.3 A Relay Command – Turn Lights ON 31
5.2.4 A Switcher Command 32
5.2.5 A Power Amplifier Command 32
5.2.6 An LCD Keypad Command 33
5.2.7 Setting the Button State and Color 34
5.2.8 The Ignore Button Command 35
6 The Kramer RC Configuration Menus 37
6.1 The File Menu 37
6.2 The Edit Menu 38
6.3 The Configuration Menu 38
6.4 The Device Menu 39
6.4.1 The Connect Command 39
6.4.2 The Device Properties Dialog Box 40
6.5 The Help Menu 40
6.6 Load Firmware 41
7 Connecting the RC-6X Series Room Controller as a Standalone Device 43