Owner's manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The RC Configuration Software
20
4.5 The Kramer RC-SV Configuration Main Window
After importing the drivers and defining the ports, use the Kramer RC
Configuration main window to assign a sequence of commands (the macro)
for each RC button.
Figure 17
illustrates the Kramer RC-SV Configuration
main window
1
Table 5, and defines it:
Figure 17: The Kramer RC Configuration Main Window
Table 5: Kramer RC Configuration Window Features
#
Feature
Function
1 Menu Bar Menus are described in section 5
Device Area
2 Connection Box Displays the connection properties with the device (IP address or
com port)
2
3 Name Box Displays the name of the specific device
2
4 Master Box Displays the Master device to which the auxiliary device keypad is
connected. Change the master device type and the auxiliary device
Keypad via the File menu (see section
6.1)
5 Keypad Box Select the device type
3
6 Keypad Tab Shows the layout of the RC buttons according to the device type
1 The Window appearance is slightly different for each machine (for example, the keypad is specific to the machine selected)
2 The name and IP number are initially set by the Properties dialog box (see section
7.2)
3 The device type can be selected only if there is no device connected to the computer. If a device is connected, the device
type is selected automatically